As soon as no air bubbles can be seen, seal the hose with a finger und and install it again as intended on the return pipe at the top edge of the aquarium. Please make sure that the possible maximal flow is adjusted to the inlet-outlet connector. Lead the hose into the bucket and carry out the dearation process (evacuate the air) by activating the manual pump. Take the return-flow hose that conducts the water from the filter to the tank and lead it into a clean bucket that is placed below the filter. In case this is not possible due to aquarium technical reasons, seal the whole suction surface so that no external air can get into the filter. Provides quiet, efficient filtration for fresh and saltwater aquariumsĮspecially the suction intake /inlet and the connected suction surface must be checked for tightness and adjusted according to the water level of the aquarium.Convenient self-priming pump that eliminates the need for manual siphoning Single valve disconnect & priming pump ease routine maintenance.This is a helpful feature if you want to adjust the output flow from the filter.3 or 4 media trays (depends on the model) capable of handling your choice of filtration media Comes with an adjustable spray bar.A pump can draw water from an under-gravel filter, and run it into a canister for double filtration Canister filters for aquariums use high water pressure, from a properly powered pump, to force water through the dense filter media.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |